M&P can make custom Turcite Machined Parts to your specifications or drawings.
We have a plastic machining facility; Turcite® is one of the plastics we can use to make parts.
MATERIAL DESCRIPTION
Turcite® is a self-lubricating thermoplastic bearing material manufactured by Trelleborg Sealing Solutions U.S., Inc.
These materials are cost effective, chemically resistant, wear resistant, and can be used in a wide range of temperatures.
There are two grades of Turcite®: Turcite® A and Turcite® X.
Turcite grades are acetal-based materials, their properties and applications can be compared to Delrin AF®.
Turcite® materials are only available in rod form.
NOTABLE MATERIAL FEATURES
- Self-lubricating
- Low cost
- High chemical resistance
- Moisture resistant
- Always oven annealed for stress-relief
GRADES OF TURCITE®
Turcite® A
(also known as Turcite® TA)
- Turcite® A is suitable for moderate to heavy loads at moderate speeds.
- Turcite A performs well under vibratory and dynamic loading and is readily machinable.
- Turcite® A is BLUE in color.
Turcite® X
(also known as Turcite® TX)
- Turcite® X excels in low load and high speed applications.
- Turcite X has minimal hygroscopic characteristics and possesses low thermal expansion properties, resulting in a structurally stable material
- Turcite® X is RED in color.
TURCITE PARTS
M&P makes Turcite® Machined Parts in a completely controlled environment.
Examples of parts we machine from Turcite®:
Turcite O-rings, Turcite Seats, Turcite Bushings, Turcite Bearings, Turcite Guide Blocks, Turcite Ways, Turcite Wear Pads, Turcite Washers.
Turcite® is a registered trademark of Trelleborg Sealing Solutions U.S., Inc.
M&P can make custom Turcite Machined Parts to your specifications or drawings.
We have a plastic machining facility; Turcite® is one of the plastics we can use to make parts.
MATERIAL DESCRIPTION
Turcite® is a self-lubricating thermoplastic bearing material manufactured by Trelleborg Sealing Solutions U.S., Inc.
These materials are cost effective, chemically resistant, wear resistant, and can be used in a wide range of temperatures.
There are two grades of Turcite®: Turcite® A and Turcite® X.
Turcite grades are acetal-based materials, their properties and applications can be compared to Delrin AF®.
Turcite materials are only available in rod form.
NOTABLE MATERIAL FEATURES
- Self-lubricating
- Low cost
- High chemical resistance
- Moisture resistant
- Always oven annealed for stress-relief
GRADES OF TURCITE®
Turcite® A
(also known as Turcite TA)
- Turcite® A is suitable for moderate to heavy loads at moderate speeds.
- Turcite A performs well under vibratory and dynamic loading and is readily machinable.
- Turcite® A is BLUE in color.
Turcite® X
(also known as Turcite® TX)
- Turcite® X excels in low load and high speed applications.
- Turcite X has minimal hygroscopic characteristics and possesses low thermal expansion properties, resulting in a structurally stable material
- Turcite® X is RED in color.
TURCITE PARTS
M&P makes Turcite® Machined Parts in a completely controlled environment.
Examples of parts we machine from Turcite®:
Turcite O-rings, Turcite Seats, Turcite Bushings, Turcite Bearings, Turcite Guide Blocks, Turcite Wear Pads, Turcite Washers.
Turcite® is a registered trademark of Trelleborg Sealing Solutions U.S., Inc.