NYLON MACHINED PARTS

M&P Flange & Pipe Protection manufactures custom Nylon Machined Parts built precisely to your drawings, prints, or specifications. With an in-house plastic machine shop and stocked Nylon materials, we deliver fast turnaround, repeatable quality, and tight-tolerance accuracy for demanding industrial applications.

Because Nylon offers an excellent balance of strength, wear resistance, and machinability, it remains one of the most widely used engineering plastics in the world.

MATERIAL DESCRIPTION

Nylon is frequently selected as a cost-effective replacement for bronze, brass, aluminum, steel, and other metals, as well as wood, rubber, and lower-performance plastics. As a result, Nylon machined parts are commonly used in applications requiring durability, vibration dampening, and long service life.

NOTABLE MATERIAL FEATURES

  • Strong tensile strength and high modulus of elasticity

  • Good impact resistance and toughness

  • High heat distortion temperature

  • Excellent wear, abrasion, and vibration resistance

  • Resistant to many chemicals, alkalies, dilute acids, and oxidizing agents

  • Available in 6/6 (extruded) and 6 (cast) grades

  • Offered in Natural, Black, MD, Glass-Filled, Oil-Filled, and specialty compounds

  • Note: Nylon® is not moisture resistant, which should be considered during material selection

GRADES OF EXTRUDED NYLON

  • Nylon 101 – Extruded Nylon 6/6

  • Nylatron® GS – Extruded Nylon 6/6, MoS₂-filled

  • 30% Glass-Reinforced Nylon 6/6 – High stiffness and dimensional stability

GRADES OF CAST NYLON

  • Nylatron® MC901

  • Nylatron® MC907

  • Nylatron® GSM

  • Nyloil®

  • Nylatron® GSM Blue

  • Nylatron® NSM

Cast Nylon grades are commonly chosen for larger diameters, thicker cross-sections, and heavy-load applicationswhere extruded materials may be limited.

NYLON PARTS WE MACHINE

All Nylon parts are produced in a controlled machining environment to ensure consistency, surface finish quality, and dimensional accuracy—run after run.

Common Nylon machined parts include:

  • Nylon Bearings

  • Nylon Bushings

  • Nylon Guide Blocks

  • Nylon O-Rings

  • Nylon Seats

  • Nylon Sheaves

  • Nylon Washers

  • Nylon Wear Pads

WHY BUY NYLON MACHINED PARTS FROM M&P?

  • In-house plastic machine shop

  • Nylon material stocked for immediate production

  • Custom parts machined to print or reverse-engineered

  • Consistent quality, tight tolerances, and repeatability

  • Trusted industrial supplier of engineered plastic components

If you need custom Nylon Machined Parts, M&P is ready to support your project—from prototype through full production.

Nylatron® is a registered trademark of Mitsubishi Chemical Advanced Materials..
Nyloil® is a registered trademark of Cast Nylons Ltd.

Nylon Machined Shapes

Quick Info

Black Nylon Parts
Custom machined nylon sheave pulley for cable applications
Plastic Machined Parts
Nylon Machined Shapes

NYLON MACHINED PARTS

M&P Flange & Pipe Protection manufactures custom Nylon Machined Parts built precisely to your drawings, prints, or specifications. With an in-house plastic machine shop and stocked Nylon materials, we deliver fast turnaround, repeatable quality, and tight-tolerance accuracy for demanding industrial applications.

Because Nylon offers an excellent balance of strength, wear resistance, and machinability, it remains one of the most widely used engineering plastics in the world.

MATERIAL DESCRIPTION

Nylon is frequently selected as a cost-effective replacement for bronze, brass, aluminum, steel, and other metals, as well as wood, rubber, and lower-performance plastics. As a result, Nylon machined parts are commonly used in applications requiring durability, vibration dampening, and long service life.

NOTABLE MATERIAL FEATURES

  • Strong tensile strength and high modulus of elasticity

  • Good impact resistance and toughness

  • High heat distortion temperature

  • Excellent wear, abrasion, and vibration resistance

  • Resistant to many chemicals, alkalies, dilute acids, and oxidizing agents

  • Available in 6/6 (extruded) and 6 (cast) grades

  • Offered in Natural, Black, MD, Glass-Filled, Oil-Filled, and specialty compounds

  • Note: Nylon® is not moisture resistant, which should be considered during material selection

GRADES OF EXTRUDED NYLON

  • Nylon 101 – Extruded Nylon 6/6

  • Nylatron® GS – Extruded Nylon 6/6, MoS₂-filled

  • 30% Glass-Reinforced Nylon 6/6 – High stiffness and dimensional stability

GRADES OF CAST NYLON

  • Nylatron® MC901

  • Nylatron® MC907

  • Nylatron® GSM

  • Nyloil®

  • Nylatron® GSM Blue

  • Nylatron® NSM

Cast Nylon grades are commonly chosen for larger diameters, thicker cross-sections, and heavy-load applicationswhere extruded materials may be limited.

NYLON PARTS WE MACHINE

All Nylon parts are produced in a controlled machining environment to ensure consistency, surface finish quality, and dimensional accuracy—run after run.

Common Nylon machined parts include:

  • Nylon Bearings

  • Nylon Bushings

  • Nylon Guide Blocks

  • Nylon O-Rings

  • Nylon Seats

  • Nylon Sheaves

  • Nylon Washers

  • Nylon Wear Pads

WHY BUY NYLON MACHINED PARTS FROM M&P?

  • In-house plastic machine shop

  • Nylon material stocked for immediate production

  • Custom parts machined to print or reverse-engineered

  • Consistent quality, tight tolerances, and repeatability

  • Trusted industrial supplier of engineered plastic components

If you need custom Nylon Machined Parts, M&P is ready to support your project—from prototype through full production.

Nylatron® is a registered trademark of Mitsubishi Chemical Advanced Materials..
Nyloil® is a registered trademark of Cast Nylons Ltd.

Black Nylon Parts
Industrial nylon sheave pulley with bearing installed

Quick Info