Stick-On Guard™ Adhesive Flange Protectors
Stick-On Guard flange protectors protect raised-face flanges during shipping, storage, and handling. Additionally, the pressure-sensitive adhesive allows crews to install each protector quickly without tools. As a result, flange faces remain clean, undamaged, and ready for assembly. Most importantly, this protection helps reduce rework, delays, and unnecessary repair costs.
Stick-On Guard flange protectors are self-adhesive polyethylene discs that protect the raised face sealing surface of ANSI flanges and valves from abrasion, damage, and contamination during shipping, storage, sandblasting, and painting.
These adhesive flange protectors eliminate the hassle of masking or duct tape. With a simple peel-and-stick application, Stick-On Guard flange protectors install in seconds—saving time, reducing labor costs, and improving consistency during storage, shipping, sandblasting, and painting operations.
By protecting the flange sealing surface, Stick-On Guard adhesive flange protectors help ensure manufactured and fabricated components arrive in the same condition they left your facility. This reduces costly rework, rejects, delays, and downtime.
Flange protection is inexpensive insurance that preserves product quality and protects sealing integrity.
Stick-On Flange Protectors – Features & Specifications
-
Designed to cover the raised face of ANSI flanges (does not cover bolt holes)
-
Peel-and-stick adhesive flange protector — no tools required
-
Apply by removing paper backing and pressing firmly onto a clean, dry surface
-
.062″ thick polyethylene disc with industrial adhesive backing
-
Easily removed after sandblasting or painting — no adhesive cleanup
-
Ideal temperature range: 50°F – 100°F
-
UV- and age-resistant for indoor and outdoor use
-
Saves time versus masking, taping, or improvised covers
-
Any size available to meet your flange requirements
Why Use M&P Stick-On Guard™ Adhesive Flange Protectors?
When flange face protection matters, manufacturers, fabricators, and distributors trust M&P Flange & Pipe Protection.
-
Decades of experience manufacturing flange and pipe protection products
-
Proven performance in oil & gas, petrochemical, fabrication, and industrial markets
-
Consistent quality and fit you can rely on
-
In-stock adhesive flange protectors for fast shipment
-
Manufactured to protect critical sealing surfaces and reduce costly damage
M&P Flange & Pipe Protection
9426 Katy Fwy
Houston, TX 77055
Email: sales@m-p.com
We have other Raised Face Flange Protectors available.
We also carry Full Face Flange Protectors
Frequently Asked Questions – Stick-On Guard™ Adhesive Flange Protectors
Q: What are Stick-On Guard™ Adhesive Flange Protectors?
A: Stick-On Guard™ Adhesive Flange Protectors are flat, circular polyethylene discs with a pressure-sensitive adhesive backing designed to protect the raised face sealing surface of ANSI flanges and valves from damage, abrasion, and contamination.
Q: What part of the flange do adhesive flange protectors cover?
A: Stick-On Guard™ flange protectors are designed to cover the raised face only. They do not cover bolt holes, making them ideal for protecting the critical sealing surface without interfering with bolting or hardware.
Q: When should adhesive flange protectors be used?
A: Adhesive flange protectors are commonly used during storage, shipping, fabrication, sandblasting, painting, and jobsite handling to prevent damage to flange sealing surfaces before installation.
Q: Are Stick-On Guard™ flange protectors better than duct tape or masking?
A: Yes. Unlike duct tape or masking, Stick-On Guard™ adhesive flange protectors install in seconds, stay securely in place, and remove cleanly with no adhesive residue, saving time, labor, and cleanup costs.
Q: Do Stick-On Guard™ flange protectors leave adhesive residue?
A: No. These adhesive flange protectors are designed to be easily removed before sandblasting or painting without leaving residue or requiring cleanup.
Q: What material are Stick-On Guard™ Adhesive Flange Protectors made from?
A: Stick-On Guard™ flange protectors are made from .062″ thick polyethylene with an industrial pressure-sensitive adhesive backing, providing durability and reliable protection.
Q: What temperature range can adhesive flange protectors be used in?
A: Stick-On Guard™ adhesive flange protectors perform best in an ideal temperature range of 50°F to 100°F, ensuring proper adhesion during use.
Q: Are Stick-On Guard™ flange protectors UV resistant?
A: Yes. These adhesive flange protectors are UV- and age-resistant, making them suitable for both indoor and outdoor storage applications.
Q: What flange sizes are available?
A: Stick-On Guard™ adhesive flange protectors are available in any size to meet your specific flange requirements, including standard ANSI raised-face flanges.
Q: Can adhesive flange protectors be used on valves?
A: Yes. Stick-On Guard™ flange protectors are commonly used on valve flanges to protect the raised face sealing surface during handling, shipping, and storage.
Q: Why is raised face flange protection important?
A: Damage to the raised face can cause leaks, improper sealing, and costly rework. Adhesive flange protectors help preserve the sealing surface, reducing rejects, downtime, and installation issues.
Q: Are Stick-On Guard™ adhesive flange protectors reusable?
A: Stick-On Guard™ flange protectors are intended for single-use applications, providing clean, reliable protection that can be removed and discarded once no longer needed.
Q: Who manufactures Stick-On Guard™ Adhesive Flange Protectors?
A: Stick-On Guard™ flange protectors are manufactured by M&P Flange & Pipe Protection, a trusted supplier of flange and pipe protection products for decades.
Q: Where are M&P adhesive flange protectors shipped from?
A: M&P ships adhesive flange protectors from its Houston facility:
9426 Katy Fwy, Houston, TX 77055, providing fast, reliable delivery across the U.S.
Q: Are Stick-On Guard™ flange protectors in stock?
A: Yes. Stick-On Guard™ adhesive flange protectors are in stock and ready to ship, ensuring quick availability for urgent projects.
Q: Does M&P offer other types of flange protectors?
A: Yes. In addition to adhesive flange protectors, M&P offers raised face flange protectors, full face flange protectors, and other flange and pipe protection solutions.
Stick-On Guard™ Adhesive Flange Protectors
Stick-On Guard flange protectors protect raised-face flanges during shipping, storage, and handling. Additionally, the pressure-sensitive adhesive allows crews to install each protector quickly without tools. As a result, flange faces remain clean, undamaged, and ready for assembly. Most importantly, this protection helps reduce rework, delays, and unnecessary repair costs.
Stick-On Guard flange protectors are self-adhesive polyethylene discs that protect the raised face sealing surface of ANSI flanges and valves from abrasion, damage, and contamination during shipping, storage, sandblasting, and painting.
These adhesive flange protectors eliminate the hassle of masking or duct tape. With a simple peel-and-stick application, Stick-On Guard flange protectors install in seconds—saving time, reducing labor costs, and improving consistency during storage, shipping, sandblasting, and painting operations.
By protecting the flange sealing surface, Stick-On Guard adhesive flange protectors help ensure manufactured and fabricated components arrive in the same condition they left your facility. This reduces costly rework, rejects, delays, and downtime.
Flange protection is inexpensive insurance that preserves product quality and protects sealing integrity.
Stick-On Flange Protectors – Features & Specifications
-
Designed to cover the raised face of ANSI flanges (does not cover bolt holes)
-
Peel-and-stick adhesive flange protector — no tools required
-
Apply by removing paper backing and pressing firmly onto a clean, dry surface
-
.062″ thick polyethylene disc with industrial adhesive backing
-
Easily removed before sandblasting or painting — no adhesive cleanup
-
Ideal temperature range: 50°F – 100°F
-
UV- and age-resistant for indoor and outdoor use
-
Saves time versus masking, taping, or improvised covers
-
Any size available to meet your flange requirements
Why Use M&P Stick-On Guard™ Adhesive Flange Protectors?
When flange face protection matters, manufacturers, fabricators, and distributors trust M&P Flange & Pipe Protection.
-
Decades of experience manufacturing flange and pipe protection products
-
Proven performance in oil & gas, petrochemical, fabrication, and industrial markets
-
Consistent quality and fit you can rely on
-
In-stock adhesive flange protectors for fast shipment
-
Manufactured to protect critical sealing surfaces and reduce costly damage
M&P Flange & Pipe Protection
9426 Katy Fwy
Houston, TX 77055
Email: sales@m-p.com
Proven, In-Stock Flange Protection
M&P has manufactured self-adhesive flange protectors for decades. Stick-On Guard™ flange protectors are in stock and ready to ship, providing fast, reliable protection when you need it most.
We also offer:
-
Full Face Flange Protectors for complete flange coverage
Frequently Asked Questions – Stick-On Guard™ Adhesive Flange Protectors
Q: What are Stick-On Guard™ Adhesive Flange Protectors?
A: Stick-On Guard™ Adhesive Flange Protectors are flat, circular polyethylene discs with a pressure-sensitive adhesive backing designed to protect the raised face sealing surface of ANSI flanges and valves from damage, abrasion, and contamination.
Q: What part of the flange do adhesive flange protectors cover?
A: Stick-On Guard™ flange protectors are designed to cover the raised face only. They do not cover bolt holes, making them ideal for protecting the critical sealing surface without interfering with bolting or hardware.
Q: When should adhesive flange protectors be used?
A: Adhesive flange protectors are commonly used during storage, shipping, fabrication, sandblasting, painting, and jobsite handling to prevent damage to flange sealing surfaces before installation.
Q: Are Stick-On Guard™ flange protectors better than duct tape or masking?
A: Yes. Unlike duct tape or masking, Stick-On Guard™ adhesive flange protectors install in seconds, stay securely in place, and remove cleanly with no adhesive residue, saving time, labor, and cleanup costs.
Q: Do Stick-On Guard™ flange protectors leave adhesive residue?
A: No. These adhesive flange protectors are designed to be easily removed before sandblasting or painting without leaving residue or requiring cleanup.
Q: What material are Stick-On Guard™ Adhesive Flange Protectors made from?
A: Stick-On Guard™ flange protectors are made from .062″ thick polyethylene with an industrial pressure-sensitive adhesive backing, providing durability and reliable protection.
Q: What temperature range can adhesive flange protectors be used in?
A: Stick-On Guard™ adhesive flange protectors perform best in an ideal temperature range of 50°F to 100°F, ensuring proper adhesion during use.
Q: Are Stick-On Guard™ flange protectors UV resistant?
A: Yes. These adhesive flange protectors are UV- and age-resistant, making them suitable for both indoor and outdoor storage applications.
Q: What flange sizes are available?
A: Stick-On Guard™ adhesive flange protectors are available in any size to meet your specific flange requirements, including standard ANSI raised-face flanges.
Q: Can adhesive flange protectors be used on valves?
A: Yes. Stick-On Guard™ flange protectors are commonly used on valve flanges to protect the raised face sealing surface during handling, shipping, and storage.
Q: Why is raised face flange protection important?
A: Damage to the raised face can cause leaks, improper sealing, and costly rework. Adhesive flange protectors help preserve the sealing surface, reducing rejects, downtime, and installation issues.
Q: Are Stick-On Guard™ adhesive flange protectors reusable?
A: Stick-On Guard™ flange protectors are intended for single-use applications, providing clean, reliable protection that can be removed and discarded once no longer needed.
Q: Who manufactures Stick-On Guard™ Adhesive Flange Protectors?
A: Stick-On Guard™ flange protectors are manufactured by M&P Flange & Pipe Protection, a trusted supplier of flange and pipe protection products for decades.
Q: Where are M&P adhesive flange protectors shipped from?
A: M&P ships adhesive flange protectors from its Houston facility:
9426 Katy Fwy, Houston, TX 77055, providing fast, reliable delivery across the U.S.
Q: Are Stick-On Guard™ flange protectors in stock?
A: Yes. Stick-On Guard™ adhesive flange protectors are in stock and ready to ship, ensuring quick availability for urgent projects.
Q: Does M&P offer other types of flange protectors?
A: Yes. In addition to adhesive flange protectors, M&P offers raised face flange protectors, full face flange protectors, and other flange and pipe protection solutions.
